FFL-uni drilling and cutting template

With the help of the Regel-air ® drilling and cutting template, the FFL-uni can be fitted quickly and easily.

Please log in to see prices

Available, delivery time: 2-5 days

Product number: SCH_88

Contents: 1 item

Product information " FFL-uni drilling and cutting template"

The Regel-air ® drilling and cutting template makes it quick and easy to install the FFL -uni.

Installation of the PVC window:

Clamp the template between the sash and the window frame when closing the window
Pre-drill holes through the drilling channels in the template using a 3mm drill bit
Mark the ends of the template on the window sash with a pencil
Screw on the Regel-air ® FFL -uni and fit the cover caps
Open the window to position the template against the marked areas from the inside
Sash gasket Cut away the excess with a sharp craft knife or remove the gasket
Cut away the outer gasket from the window frame at the designated points and, if necessary, remove the centre gasket in the opposite from the FFL -uni

We recommend fitting every room with Regel-air ® ventilation systems. This ensures that the entire flat is reliably ventilated.

Window type:	All window materials

Made in Germany

Europe-wide delivery

Over 25 years in business